LG Washer error code IE
IE
What it means
Inlet error - the drum is not filled to the required level with water.
Likely causes
- The building may be having a water outage, the tap could be closed, or the inlet hose might be disconnected
- The inlet hose may be pressed or kinked
- Cold weather may have caused the inlet hose or taps to freeze
- If the problem persists, the inlet valve may be malfunctioning
Safety first: switch the appliance off and unplug it (or turn it off at the circuit breaker) before you check anything. If water is involved, close the water supply valve too. Never open panels or touch internal wiring. Anything that involves gas lines, refrigerant or sealed systems, or mains-voltage wiring is a job for a professional - not a home fix.
Safe first checks
- Ensure the taps are open and the inlet hoses are properly connected and securely attached
- Straighten any kinked or pressed inlet hose so water can flow freely
- If the taps or hoses are frozen, thaw them with warm water below 50 degrees C (122 degrees F)
- Clean the inlet filter: close the taps, separate the hose end, and remove rust, sand and debris from the filter with a small brush
When to call a pro
If the issue persists after these steps, the inlet valve may be malfunctioning - reach out to an LG service center.
Repair or replace?
Try the safe checks first - many codes clear with a clean filter, a straight hose or a balanced load, and those cost nothing. If the code comes back, a service call typically costs $50-$150 for the visit and diagnosis (Angi puts an average service call at $50-$100; Sears lists a $90-$150 diagnostic fee). Get the full repair quote before you decide. If the machine is old and the quote is a large part of the price of a new one, replacing usually makes more sense than repairing.
Source: LG Support